20
'14
Written on
SOURIAU – SUNBANK Connection Technologies
12
'14
Written on
Morgan Advanced Materials
Morgan announces availability of sapphire lenses for industrial applications
A high-specification alternative to glass, already established in critical applications in the aerospace and defence sectors, is now being offered for a variety of industrial applications by Morgan Advanced Materials.
07
'14
Written on
EPLAN
Strategic Partners: Mitsubishi Electric Europe and Eplan
More integration for electrical engineering and PLC programming Transferring data from electrical engineering directly into PLC programming – this is now state-of-the-art technology with the integration of Eplan Electric P8 and GX Works2. Yet Mitsubishi Electric Europe and Eplan continue striving for more as partners in the e-F@ctory Alliance to further increase project quality and data consistency for users.
03
'14
Written on
Keyence Mexico
Keyence safety light curtains boost productivity and efficiency at Bosch.
By using Keyence safety light curtains instead of hard guarding, Bosch has both increased efficiency and decreased cycle times.
01
'14
Written on
HMS Industrial Networks AB
New Anybus gateway makes Modbus devices talk BACnet
The new Anybus BACnet to Modbus gateway makes it possible to connect Modbus devices to a BACnet network. The gateway handles conversion between Modbus (RTU, ASCII, and TCP) and BACnet/IP and makes each connected Modbus device appear as a BACnet compliant device on the BACnet network.
26
'14
Written on
KOLLMORGEN
Grinding with half of the axes
At Bottero Group, KOLLMORGEN’s AKD series drives perform multiple functions With the “Titan” series, Bottero Group developed a fully automated plant for glass processing that performs bilateral grinding of pane edges. The grinder is composed of a large frame that allows the standard processing of sheets with different sizes and shapes without any operation modifications. The main objective during the design process was to create the simplest, most fully automated driving system without jeopardizing its efficiency. To achieve this aim, Bottero developed in co-operation with KOLLMORGEN a solution that is based on a single AKD servo-converter for driving two servo-motors that are not simultaneously operating.
26
'14
Written on
PROSOFT TECHNOLOGY EMEA
Failure is not an option!
ProSoft Technology’s PROFIBUS Modules and Industrial Radios allow critical data to be transmitted from ControlLogix PACs at Flood Defense System.
25
'14
Written on
NORD Drivesystems
Taken to new heights: Industrial gear units from NORD complete heavy workload at a reservoir project
Bargteheide – Swiss energy supplier Axpo is close to finishing the demanding large-scale “Linthal 2015” construction project: Switzerland’s largest hydroelectric undertaking will increase the overall output of the existing Linth-Limmern power plants from 480 MW to 1,480 MW. A new underground pumping station was created to pump water from the Limmernboden reservoir at an altitude of 1,860 m above sea level into the Muttsee lake about 600 m higher up. This elevation difference will be used to produce hydroelectric power on demand. The heart of the project in particular – the underground center for the new pumped storage hydroelectric power station – required gigantic efforts. At an extreme incline of 45 degrees and a height difference of approximately 180 m, conveyor systems in a sub-station transported 500 t of excavated material per hour, around the clock. On a second conveyor belt, the crushed material was transported up to the gravel plant where it was stored or processed for further use. For a total of three years, these conveyors were driven by NORD industrial gear units and transported approximately one million tons of material.
23
'14
Written on
ProSoft Technology Asia Pacific
